tft espi

We have hosted the application tft espi in order to run this application in our online workstations with Wine or directly.

Quick description about tft espi:

An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

Features:

• For RP2040, e.g. Raspberry Pi Pico
• For ESP32 and ESP32-S2 (ESP32C3 untested)
• For ESP8266
• For STM32F1xx, STM32F2xx, STM32F4xx, STM32F767
• Generic (non-optimised Arduino function calls) are used by the library for other processors
• The library supports some TFT displays

Programming Language: C.
Categories: