libnexstar to run in linux online online with Winfy

We have hosted the application libnexstar to run in linux online in order to run this application in our online workstations with Wine or directly.

Quick description about libnexstar to run in linux online:

This library implements the serial commands supported by the Celestron
NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies
to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar
SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc.
SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the
corresponding Orion mounts.

Communication to the hand control is 9600 bits/sec, no parity and one
stop bit via the RS-232 port on the base of the hand control.

Communication can be established over TCP/IP if nexbridge is running
on the computer connected to the telescope.

To control network based telescopes nexbridge must be used on the remote site.
https: //sourceforge.net/projects/nexbridge/

Features:

• Can control network exported mounts with nexbridge
• Full support for SkyWatcher /Orion mounts (HC firmware > X.38.06)
• All published NexStar commands are supported
• Some AUX commands are supported since v.0.08
• Record / Play PEC data
• Download / uplod PEC data from/to the mount
• Set / Get mount backlash settings
• Set / Get autoguide rate
• Both Equatorial and Alt/Az mounts are supported
• Works with Linux, Mac OS X, FreeBSD, Solaris

Programming Language: C.

.